K series universal pressure transmitter

  Main features :
Anti-overload and anti-impact strong
High stability: fine than 0.1% full range in every year
Anti-interference ability strong: waterproof, dust-proof, vibration-proof, explosion-proof, corrosion-proof
Wide applicability: the products have many kinds of models and process connection form and material, which is adaptable to various measuring field.
Easy installation: reasonable product structure with small volume and weight light, can be direct installed at any position.
Technical parameters
Working voltage (12.5~36) V DC
Output signal (4~20) mA DC (analog, two wire system)
Measuring scope relative pressure: max. 0~60 MPa min. 0~1.6 KPa
Absolute pressure: max. 0~60 MPa min. 0~20 KPa
Negative relative pressure 0.1 MPa~1 MPa
Accuracy: accuracy grade: 0.1 grade, 0.2 grade, 0.5 grade
Temperature influence: 0.15%FS/10
Stability: fine than 0.1%FS/year
Position influence: the installation position does not affect zero point
Permission temperature normal working temperature: -20~70
Membrane: -20~80 (short-time may reached 130)
Storage temperature: -20~80
High-low temperature type: -65~150 10~200 10~350
Relative humidity 098% RH
Explosion-proof grade intrinsic safety type ExibIICT6 or ExiaIICT6
Protection grade IP65
A part of material contacted with measured medium
Process connection: 316 L/304/1Gr18Ni9Ti stainless steel /Hutchinson Alloy C
Seal element: fluorine rubber/Nitrile rubber/PTEE/full sealing weld
Connection lead-out mode
may be lead-out from any outlet according to requirement, it is advised to use 10 industrial cable as lead so that it is sealed. Lead-out joint is a universal cable joint PG16, no lead end should be sealed with terminal cover.
Adjustment scope Adjustment scope for zero point: 5%
Adjustment scope for full range: 20%
Product Details:
Place of Origin  Fujian, China
Model Number  K series