|
 Technical Parameters:
Square Counter-flow cooling tower of glass machinery Design and Research Institute Ministry of Industry, fourth energy-efficient design of new products. The product is applied to four School of the "energy-saving glass fiber reinforced plastic cooling tower" patent, in particular the cooling tower fan is equipped with variable torque away from the pole two-speed motor, when the temperature is low (eg at night), motor on low speed, cooling tower noise can be as low 3-5dB (A).
In addition, two-speed motor with energy-saving significantly, by estimation, more than one cooling tower equipped with a single-speed motor, though the low humidity in the air wet bulb may stop part of the electrical energy-saving, but still more than double speed motor consumes 40% (in years).
This product is also applied to four hospital acquired national patent "square counter-flow cooling tower with inclined trapezoidal wave packing film" by Beijing and Foshan IWHR real tower test, its heat resistance characteristics are superior to other fillers. Motors, fans are supporting the supply required to send employees to the factory-site installation or technical advice.
Product Type Description:
Square counter-flow cooling tower has three series, the nine models, 90 products.
Structural characteristics
(1) Filling: The four homes patented product - oblique trapezoidal wave packing film, an increase of convex transverse reinforcement, water redistribution capacity, small resistance, thermal performance, high temperature 70 , resistance to low temperature -50 , resistance flammable good.
(2) Motor: Tsinghua University designed by business Mengjin Motor Factory produced four hospital patented a variable torque, low noise, variable energy-saving motors, sealing waterproof performance, high temperature, high efficiency and low noise.
(3) deceleration devices: power 11/5.5KW deceleration device used in polyester fiber-reinforced neoprene rubber belt transmission power, high temperature, high efficiency, water does not stretch to overcome the slipping phenomenon, very little noise. Power 15/7.5KW deceleration device used in gear mode, electric hairdryer installed outside.
(4) Fan: Department of Engineering Mechanics, Tsinghua University in accordance with this series of product parameter design of low noise, high efficiency, the wing-shaped glass fiber reinforced blades, low noise, high efficiency, blade angle adjustable.
(5) received water and water distribution devices: using reflective low-pressure nozzle, for a small tower with a single swirl nozzles, water distribution uniformity, water pressure small. Established by the closed water system, water loss can drift down to 0.01%.
(6) absorption Facilities: ultra-low-noise cooling towers in the tower out the top vent is installed with a sound-absorbing materials and acoustic shielding gate, in order to achieve maximum noise reduction.
(7) absorption facilities: ultra-low-noise cooling towers in the tower out the top vent is installed with a sound-absorbing materials and acoustic shielding gate, reducing the fan and motor noise. For small gate tower is located mushroom-type absorber.
(8) dripping noise pad: low noise and ultra-low-noise cooling tower, and specially designed permeable good silencer pad, ramp under it with a layer of film, greatly reduces dripping noise.
(9) Repair platform: tower pattern plate repair platform, easy maintenance and installation.
(10), the trays are: shallow water depth, and deep dish plate, and cooling towers with water tray for the water in use. According to order requirements, can be equipped with overflow, sewage, automatic and manual to the water pipes, can be directly under the tray from the absorbent.
(11) Stent: Cooling tower steel frame, galvanized and asphalt coated epoxy paint anti-corrosion, fasteners are used galvanized bolts.
Product Details:
Certification CE
Capacity Type Heavy Duty
Category Heat Exchanger
Place of Origin Tianjin, China (Mainland)
|
|
